Cisco Systems WSC4500XF16SFP Manuel d'utilisateur télécharger pdf (Page 144)

Chapter 4 Removing and Replacing FRUs

Replacing Backplane Modules on a Catalyst 4507R or 4510R Switch

4-28

Catalyst 4500 Series Switches Installation Guide

78-14409-08

Step 7 Pull out the module while holding the top left and top right corners. (See

Figure 4-24.)

Note When handling the modules, do not touch the chips or the gold edge

contacts on the module.

Figure 4-24 Removing the Module

Step 8 Put the replacement module in at roughly a 30 degree angle, and gently push the

module down. Make sure you apply force evenly on the left and right. (See

Figure 4-25.)

Figure 4-25 Seating the Replacement Module

130660

130661

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 193 194

Pas de commentaire

Cisco Systems WSC4500XF16SFP Manuel d'utilisateur Page 144