Cisco Systems SMD48FXSE Manuel d'utilisateur télécharger pdf (Page 50)

CHAPTER

5-1

Cisco VG350 Voice Gateway Hardware Installation Guide

OL-25970-01

Powering On the Cisco VG350 Voice Gateway

To power on your Cisco VG350 Voice Gateway, perform the following tasks in the order listed, as

required:

• Checklist for Power-On, page 5-1

• Power-On Procedure, page 5-1

• Troubleshooting, page 5-3

Checklist for Power-On

You can power on a Cisco VG350 Voice Gateway if it meets the requirements described in

Chapter 4, “Installing the Cisco VG350 Voice Gateway”:

• The chassis is securely mounted.

• Power cable is connected.

• Interface cables are connected.

Power-On Procedure

Perform this procedure to power on your Cisco VG350 Voice Gateway, and verify that it goes through

its initialization and self-test. When this is finished, the Cisco VG350 Voice Gateway is ready to

configure.

Warning

This unit might have more than one power supply connection. All connections must be removed to

de-energize the unit.

Statement 1028

Warning

Installation of the equipment must comply with local and national electrical codes.

Statement 1074

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 59 60

Pas de commentaire

Cisco Systems SMD48FXSE Manuel d'utilisateur Page 50