Cisco Systems WSC2960XR48FPSI Manuel d'utilisateur télécharger pdf (Page 41)

PurposeCommand or Action

To clear the password, enter the no vtp password global

configuration command.

Note

Returns to privileged EXEC mode.end

Example:

Switch(config)# end

Step 3

Verifies your entries. The output appears like this:show vtp password

Step 4

Example:

Switch# show vtp password

VTP password: 89914640C8D90868B6A0D8103847A733

(Optional) Saves the configuration in the startup configuration file.copy running-config startup-config

Example:

Switch# copy running-config

Step 5

startup-config

Related Topics

Passwords for the VTP Domain, on page 21

Example: Configuring a Hidden Password, on page 35

Configuring a VTP Version 3 Primary Server

When you configure a VTP server as a VTP primary server, the takeover operation starts.

SUMMARY STEPS

vtp primary [vlan | mst] [force]

DETAILED STEPS

PurposeCommand or Action

Changes the operational state of a switch from a secondary server (the default) to a

primary server and advertises the configuration to the domain. If the switch password is

configured as hidden, you are prompted to reenter the password.

vtp primary [vlan | mst] [force]

Example:

Switch# vtp primary vlan

force

Step 1

• (Optional) vlan—Selects the VLAN database as the takeover feature. This is the

default.

Catalyst 2960-XR Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX1

OL-29440-01 27

Configuring VTP

Configuring a VTP Version 3 Primary Server

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 177 178

Pas de commentaire

Cisco Systems WSC2960XR48FPSI Manuel d'utilisateur Page 41