Cisco Systems XR 12000 Series Manuel d'installation télécharger pdf (Page 30)

Cisco XR 12000 Series Router Ethernet Line Card Installation

OL-7861-01

Removing and Installing SFP Modules

Figure 20 Mylar Tab SFP Module

Removing a Mylar Tab SFP Module

To remove this type of SFP module, follow these steps:

Step 1 Attach an ESD-preventive wrist or ankle strap and follow its instructions for use.

Step 2 Disconnect and remove all interface cables from the ports; note the current connections of the cables to

the ports on the line card.

Step 3 Pull the tab gently in a slightly downward direction until it disengages from the port, then pull the SFP

module out. (See Figure 21.)

Figure 21 Removing a Mylar Tab SFP Module

Step 4

Place the removed SFP module on an antistatic mat, or immediately place it in a static shielding bag if

you plan to return it to the factory.

63065

ACTIVE

CARRIER

RX PACKET

ACTIVE

CARRIER

RX PACKET

WRAP

PASS THRU

WRAP

PASS THRU

4OC48/SRP-SFP

84504

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 83 84

Pas de commentaire

Cisco Systems XR 12000 Series Manuel d'installation Page 30