Cisco Systems 3620 Manuel d'utilisateur télécharger pdf (Page 9)

Installing a Fan-Speed Controller in Cisco 3620 Routers 9

Installing the Fan-Speed Controller

Figure 4 Removing Screws from the Motherboard

Step 3

Connect the two fan connectors to the two fan-speed controller connectors. (See

Figure 5.)

Note You can connect either fan connector to either fan-speed controller connector.

They are interchangeable.

Step 4 Connect any one of the two power supply connectors to the single fan-speed controller

power connector. (See Figure 5.)

Note Only one power supply connector is attached to the fan-speed controller. The

second power supply connector is not used, and does not affect system operation.

Remove 2 screws

13300

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Cisco Systems 3620 Manuel d'utilisateur Page 9