Cisco Systems D200 Manuel d'utilisateur télécharger pdf (Page 5)

19-5

Cisco ONS 15454 SDH Procedure Guide, R7.2

October 2007

Chapter 19 DLPs D200 to D299

DLP- D206 Clean the Fiber Adapters

DLP-D206 Clean the Fiber Adapters

Step 1 Remove the dust plug from the fiber adapter.

Step 2 Insert a CLETOP stick swab (14100400) into the adapter opening and rotate the swab.

Step 3 Place dust plugs on the fiber adapters when not in use.

Step 4 Return to your originating procedure (NTP).

DLP-D207 Delete a Server Trail

Step 1 From the View menu, choose Go to Network View.

Step 2 Click the Provisioning > Server Trails tabs.

Step 3 Click the server trail that you want to delete.

Step 4 Click Delete.

Step 5 In the confirmation dialog box, click Yes .

Step 6 Return to your originating procedure (NTP).

Purpose This task cleans the fiber adapters.

Tools/Equipment CLETOP stick swab

Prerequisite Procedures None

Required/As Needed Required

Onsite/Remote Onsite

Security Level None

Purpose This task deletes a server trail.

Tools/Equipment None

Prerequisite Procedures See Chapter 6, “Create Circuits and Low-Order Tunnels” for server trail

creation procedures.

Required/As Needed As needed

Onsite/Remote Onsite or remote

Security Level Provisioning or higher

1 2 3 4 5 6 7 8 9 10 ... 85 86

Pas de commentaire

Cisco Systems D200 Manuel d'utilisateur Page 5