Cisco Systems Network Device 2800 Manuel d'installation télécharger pdf (Page 142)

Installing and Upgrading Internal Modules in Cisco 2800 Series Routers

OL-5792-04

Installing and Removing DRAM DIMMs

Figure 13 Removing a DRAM DIMM

Step 3

Place the DIMM in an antistatic bag to protect it from ESD damage.

Installing a DRAM DIMM in a Cisco 2801 Router

To install a DRAM DIMM in a Cisco 2801 router, follow these steps:

Step 1 Locate the DIMM socket on the motherboard.

Step 2 Remove any existing DIMM by gently pulling the spring-loaded clips on the end of the socket far enough

to clear the DIMM, and gently pulling the DIMM up and away from the socket. See Figure 14.

Figure 14 Removing a DIMM

Step 3 Insert the DIMM into the DIMM socket, as shown in Figure 15.

1 Release the latches 2 Remove the DRAM DIMM

103466

103155

1 2 ... 137 138 139 140 141 142 143 144 145 146 147 ... 185 186

Pas de commentaire

Cisco Systems Network Device 2800 Manuel d'installation Page 142