Cisco Systems SMNMADPTR Manuel d'utilisateur télécharger pdf (Page 28)

Cisco Branch Routers Series Network Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0

OL-14942-02

Configuring the NME-NAM-120S for Management

NAM Configuration (NAM Software)

IP address: 209.165.200.226

Subnet mask: 255.255.255.224

IP Broadcast: 209.165.200.255

IP Interface: Internal

DNS Name: myNAM.company.com

Default Gateway: 209.165.200.225

Nameserver(s): 171.69.2.133

HTTP server: Enabled

HTTP secure server: Disabled

HTTP port: 80

HTTP secure port: 443

TACACS+ configured: No

Telnet: Enabled

SSH: Disabled

Configuring the External Interface for Management

This section describes how to configure the NME-NAM-120S to use its external interface for NAM

management traffic.

SUMMARY STEPS

From the Router Prompt

1. enable

2. configure terminal

3. interface loopback <loopback-number>

4. ip address <bogus-address> <subnetmask>

5. no shutdown

6. exit

7. interface integrated-service-engine slot/0

or for NM-NAM:

interface analysis-module slot/0

8. ip unnumber loopback <loopback-number>

9. no shutdown

10. service-module external ip address <NAM-Address> <subnetmask>

11. service-module ip default-gateway <NAM-Default-Gateway-Address>

12. end

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 57 58

Pas de commentaire

Cisco Systems SMNMADPTR Manuel d'utilisateur Page 28