Cisco Systems CF2001P Manuel d'utilisateur télécharger pdf (Page 14)

CF2001P

– 13 –

4004-7715-01

■

Setting Up the Converter (7)

1. Remove the converter from its box.

2. Remove the screw at the bottom of the con-

verter, and then remove the upper cover.

3. Set the TERM switch (S2) to ON as shown in

the illustration.

NOTE

• Set the button on the converter to “Nor-

mal”.

• In order to reduce the risk of damage to

the circuit board due to static electricity,

do not touch the circuit board pattern.

• Do not change the setting of any

switches other than those specified.

■ Setting Up the Selector (3)

1. Remove the selector from its box.

2. Remove the two screws from the selector,

and then remove the upper cover.

3. Affix aluminum tape to the converter as

shown in the illustration.

C4004U556AA

C4004U557AA

O

N

1

S2

TERM

C4004U558AA

C4004U601AA

C4004U602AA

C4004U603AA

Aluminum tape

NEXTNEXT

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 42 43

Commentaires sur ces manuels

Pas de commentaire