Cisco Systems Unified MeetingPlace Web Conferencing Manuel d'utilisateur télécharger pdf (Page 30)

2-6

Installation and Upgrade Guide for Cisco Unified MeetingPlace Web Conferencing Release 6.x

OL-13418-01

Chapter 2 Installing Web Conferencing

Installation Tasks: Web Conferencing

One NIC enabled and configured with two IP addresses;

second NIC is disabled

• Only utilizes one of the two NICs on the

system.

• The NIC is a single point of failure.

• This configuration is available for both HP

and IBM MCS server models

• To configure this option, perform the “To

Configure a Single NIC with Both IP

Addresses on the Cisco MCS Server”

procedure on page 2-7.

Both NICs enabled, one IP address per NIC

• Each NIC on the system is used, although one

NIC may be more heavily used than the other.

• Each NIC is a single point of failure. If either

NIC fails, Web Conferencing will be

unavailable.

• If the Web Conferencing server is connected

to a 100 MB/sec. network, the NIC capacity

may be exceeded in large meetings with

heavy application sharing.

• This configuration is available for both HP

and IBM MCS

server models.

• To configure this option, perform the “To

Configure One IP Address per NIC on the

Cisco MCS Server” procedure on page 2-8.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 71 72

Pas de commentaire

Cisco Systems Unified MeetingPlace Web Conferencing Manuel d'utilisateur Page 30