Cisco Systems SMC-127 Manuel d'utilisateur télécharger pdf (Page 23)

Configuring Secure Domain Routers on Cisco IOS XR Software

How to Configure Secure Domain Routers

SMC-149

Cisco IOS XR System Management Configuration Guide

DETAILED STEPS

Command or Action Purpose

Step 1

admin

Example:

RP/0/RP0/CPU0:router# admin

Enters Administration EXEC mode.

Step 2

configure

Example:

RP/0/RP0/CPU0:router(admin)# configure

Enters Administration configuration mode.

Step 3

sdr sdr-name

Example:

RP/0/RP0/CPU0:router(admin-config)# sdr

rname

Enters the SDR configuration submode for the specified SDR.

• sdr-name is the name assigned to the SDR.

Step 4

location partially-qualified-nodeid

location pair-name

Example:

RP/0/RP0/CPU0:router(admin-config-sdr:rnam

e2)# location 0/0/*

RP/0/RP0/CPU0:router(admin-config-sdr:rnam

e2)# location drp1

RP/0/RP0/CPU0:router(admin-config-sdr:rnam

e)# location 0/RP*/*

Adds additional nodes, DRP pairs, or RP pairs to an SDR.

To add a single node

Enter the location partially-qualified-nodeid command. The

value of the partially-qualified-nodeid argument is entered in the

rack/slot/* notation. Node IDs are always specified at the slot

level, so the wildcard (*) is used to specify the CPU.

To add a DRP pair

You must you must first create a pair as described in step 3 and

step 4 of Creating SDRs in a Cisco CRS-1 Router,

page SMC-140. Once the DRP pair is created, enter the

location pair-name command. pair-name is the name assigned to

the DRP pair.

To add an RP pair

Enter the location partially-qualified-nodeid command. The

value of the partially-qualified-nodeid argument for RPs is

entered in the rack/RP*/* notation. This command assigns the

redundant RP pair to the SDR. You cannot assign single RPs to an

SDR in the Cisco CRS-1.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 39 40

Commentaires sur ces manuels

Pas de commentaire

Cisco Systems SMC-127 Manuel d'utilisateur Page 23

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel Cisco Systems SMC-127