Cisco Systems 1240AG Manuel d'utilisateur télécharger pdf (Page 26)

1-12

Cisco Aironet 1240AG Series Access Point Hardware Installation Guide

OL-8371-05

Chapter 1 Overview

Network Examples with Autonomous Access Points

Point-to-Point Bridge Configuration

In a point-to-point bridge configuration, two bridges interconnect two LAN networks using a wireless

communication link (see Figure 1-10). The bridge connected to the main LAN network is classified as

a root bridge and the other bridge is classified as a non-root bridge.

Figure 1-10 Point-to-Point Bridge Configuration

Workgroup Bridge Network

The access point supports a workgroup bridge role to interconnect remote Ethernet workstations to the

main LAN. The workgroup bridge can communicate with an access point (see Figure 1-11) or with a

bridge (see Figure 1-12).

Figure 1-11 Workgroup Bridge Communicating with an Access Point

Figure 1-12 Workgroup Bridge Communicating with a Bridge

117029

Root bridge Non-root bridge

Access point

Workgroup bridge

135448

Bridge Workgroup

bridge

135499

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 125 126

Pas de commentaire

Cisco Systems 1240AG Manuel d'utilisateur Page 26