Cisco Systems 1520 Manuel d'utilisateur télécharger pdf (Page 12)

1-12

Cisco Aironet 1520 Series Outdoor Mesh Access Point Hardware Installation Guide

OL-12632-03

Chapter 1 Overview

Network Deployment Examples

Point-to-Point Bridging

The access points can be used to extend a remote network by using the 5-GHz backhaul radio to bridge

the two network segments as shown in Figure 1-6. To support Ethernet bridging, you must enable

bridging on the controller for each access point.

Figure 1-6 Access Point Point-to-Point Bridging Example

Point-to-Multipoint Bridging

The access points can be used as a RAP to connect multiple remote MAPs with their associated wired

networks (see Figure 1-7). By default, this capability is turned-off for all access points. To support

Ethernet bridging, you must enable bridging on the controller for each access point.

Wireless client access can be provided over the bridging link; however, if bridging between tall

buildings, the 2.4-GHz wireless coverage area might be limited and possibly not suitable for direct

wireless client access.

Figure 1-7 Access Point Point to Multipoint Bridging Example

148440

148439

1 2 ... 7 8 9 10 11 12 13 14

Pas de commentaire

Cisco Systems 1520 Manuel d'utilisateur Page 12