Cisco Systems OL-4387-02 Manuel d'utilisateur Page 77

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 110
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 76
11-7
Cisco 10000 Series Router Service Selection Gateway Configuration Guide
OL-4387-02
Chapter 11 Miscellaneous SSG Features
SSG Enhancements for Overlapping Services
SSG Enhancements for Overlapping Services
Overlapping services are services for which the route prefix of one service matches or is contained
within the route prefix of another service. For example, the service definition 172.16.253.0/24 overlaps
with the service definition 172.16.0.0/16 because the prefix 172.16 is contained in both definitions. The
definition 0.0.0.0/0 overlaps all other possible services.
In releases prior to Cisco IOS Release 12.2(16)BX2, the Cisco 10000 router does not allow users to be
subscribed to a service if that service overlaps another service to which a different user is subscribed.
To enable service providers to use existing overlapping definitions, the Cisco 10000 router provides the
following SSG enhancements:
Service Translation—Translates overlapping service definitions to a set of non-overlapping service
definitions.
Expansion of Service IDs—Expands the number of service IDs supported from seven to 15. The
router uses service IDs to determine which services a user is subscribed to and how to police the
user traffic.
For more information, see the following sections:
Service Translation, page 11-7
Expansion of Service IDs, page 11-11
Service Translation
The service translation mechanism translates overlapping service definitions to a set of non-overlapping
service definitions that are used internally to the router. Instead of using the service definitions that the
Cisco Subscriber Edge Services Manager (SESM) downloads, the router uses the translated network sets
to provide the desired behavior. A network set can contain a single unique prefix or multiple unique
prefixes.
To further clarify service translation for the Cisco 10000 router, consider the following example in which
services that are defined in SESM are converted to sets (for example, service networks). The
Cisco 10000 router uses these sets internally to provide the desired behavior. The following services are
defined in the example:
ssg bind service Default_256 <next hop ssg>
0.0.0.0/0.0.0.0
ssg bind service Bronze_256 <next hop ssg>
10.58.253.0/255.255.255.0
10.58.254.0/255.255.255.0
ssg bind service Silver_512 <next hop ssg>
10.58.253.0/255.255.255.0
10.58.254.0/255.255.255.0
10.58.102.6/255.255.255.255
ssg bind service Gold_2048 <next hop ssg>
10.58.253.0/255.255.255.0
10.58.254.0/255.255.255.0
10.58.102.6/255.255.255.255
ssg bind service Platinum_1024 <next hop ssg>
10.58.253.0/255.255.255.0
Vue de la page 76
1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 109 110

Commentaires sur ces manuels

Pas de commentaire