Cisco Systems DSC9148D8G48PK9 Manuel d'utilisateur Page 196

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 236
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 195
6-26
Cisco MDS 9000 Family NX-OS Interfaces Configuration Guide
OL-29284-01, Release 6.x
Chapter 6 Configuring PortChannels
Configuration Examples for F and TF PortChannels
switch(config-if)# switchport mode NP
switch(config-if)# no shut
switch(config-if)# exit
Step 6 Configure the PortChannel member interfaces on the NPV switch in dedicated mode:
switch(config)# interface fc3/1-3
switch(config-if)# shut
switch(config-if)# switchport mode NP
switch(config-if)# switchport speed 4000
switch(config-if)# switchport rate-mode dedicated
switch(config-if)# switchport trunk mode on
switch(config-if)# channel-group 2
switch(config-if)# no shut
switch(config-if)# exit
Step 7 Set the administrative state of all the PortChannel member interfaces in both NPIV core switch and the
NPV switch to ON:
switch(config)# interface fc1/4-6
switch(config-if)# shut
switch(config-if)# no shut
switch(config)# interface fc3/1-3
switch(config-if)# shut
switch(config-if)# no shut
Vue de la page 195
1 2 ... 191 192 193 194 195 196 197 198 199 200 201 ... 235 236

Commentaires sur ces manuels

Pas de commentaire