Cisco Systems NSS2000 Series Guide de démarrage rapide télécharger pdf (Page 14)

Configuring the Network Storage System (NSS)

Step 2 — Log into the NSS Configuration Interface

NSS2000 Getting Started Guide 10

To set up your computer to communicate with the NSS:

STEP 1 Set your computer’s network settings to the following:

• IP Address: 169.254.x.y (where x and y can be any number between 1 and

254). For example, 169.254.1.2.

• Subnet Mast (Netmask): 255.255.0.0.

After you configure your computer, you can log into the NSS configuration

interface. You can configure the NSS network IP settings as required.

Step 2 — Log into the NSS Configuration Interface

To log into the configuration interface:

STEP 1 If you are logging into the NSS for the first time, write down the MAC address

located on the sticker attached to the bottom of the chassis. You need the MAC

address as this is part of the default hostname. Otherwise, skip this step.

STEP 2 There are a variety of ways to display the NSS Login window.

• Open the Web browser on your computer: In the Address field, enter

http://NAS<MAC address (For example, “http://NAS0018F804E44C”.)

• Find the NSS through UPnP or Bonjour if installed.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 33 34

Pas de commentaire

Cisco Systems NSS2000 Series Guide de démarrage rapide Page 14