Cisco Systems IEM30004PC Manuel d'installation télécharger pdf (Page 146)

B-56

Cisco IE 3000 Switch Hardware Installation Guide

OL-13017-01

Appendix B Installation In a Hazardous Environment

Connecting the Switch to the Power Converter

Figure B-44 Connecting AC Power to the Power Converter

Step 3 Tighten the ground wire terminal block screw.

Note The torque should not exceed 10 in-lb.

Step 4 Insert the line and neutral wire leads into the terminal block line and neutral connections. See

Figure B-44. Make sure that you cannot see any wire lead. Ensure that only wire with insulation extends

from the connectors.

Step 5 Tighten the line and neutral terminal block screws.

Note The torque should not exceed 10 in-lb.

Step 6 Replace the plastic cover over the terminal block.

Step 7 Connect the other end of the AC power cord to the AC outlet.

1 Ground 3 AC line

2 AC neutral

202300

1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 169 170

Pas de commentaire

Cisco Systems IEM30004PC Manuel d'installation Page 146