Cisco Systems IEM30004PC Manuel d'installation télécharger pdf (Page 37)

2-11

Cisco IE 3000 Switch Hardware Installation Guide

OL-13017-01

Chapter 2 Switch Installation

Verifying Switch Operation

Follow these directions to remove or replace the compact flash memory card:

Step 1 Locate the compact flash memory card slot on the bottom of the switch. See Figure 2-7.

Figure 2-7 Removing the Compact Flash Memory Card from the Switch

Step 2 Install or remove the card, as desired:

• To remove the card, grasp the card top, and pull it out. Place it in an antistatic bag to protect it from

static discharge.

• To install a card, slide it into the slot, and press it firmly in place. The card is keyed so that you

cannot insert it the wrong way.

Verifying Switch Operation

Before installing the switch in its final location, power on the switch, and verify that the switch passes

the power-on self-test (POST).

These sections describe the steps required to connect a PC or terminal to the switch console port, to

power on the switch, and to observe POST results:

• Connecting a PC or a Terminal to the Console Port, page 2-12

• Verifying Switch Operation, page 2-11

201851

Bottom

of switch

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 169 170

Pas de commentaire

Cisco Systems IEM30004PC Manuel d'installation Page 37