Cisco Systems 4xGBE Guide de l'utilisateur télécharger pdf (Page 146)

Appendix A The External Optical Bypass Module

Installing the External Bypass Module

SCE 2000 4xGBE Installation and Configuration Guide

A-8 OL-7824-02

Bypass module is now active (in bypass), and is performing a loopback on these interfaces.

Step 6

Connect the control cable (supplied in the kit) from the Bypass 9-pin D-Type connector

on the rear panel of the SCE 2000 platform to the Control connector on the External

Optical Bypass module.

The SCE 2000 platform immediately starts providing power to the External Optical Bypass module, so the

bypass module becomes inactive, and starts transferring the traffic to the SCE 2000 platform. The “No

Bypass” LED should therefore be lit.

The figure below illustrates the connections between a SCE 2000 platform and two External

Optical Bypass modules.

1 2 ... 141 142 143 144 145 146 147 148 149 150 151 152

Pas de commentaire

Cisco Systems 4xGBE Guide de l'utilisateur Page 146