Cisco Systems Chassis AS5350 Manuel d'installation télécharger pdf (Page 30)

3-4

Cisco AS5350 Universal Gateway Chassis Installation Guide

78-10754-03 0A

Chapter 3 Installing the Cisco AS5350

Setting Up the Chassis

Required Tools and Equipment

You need the following tools and equipment to rack-mount the chassis:

• Number 2 Phillips screwdriver (not included)

• Medium flat-blade screwdriver (not included)

• Screws for attaching the chassis to the rack (not included)

• Standard rack-mount brackets (included)

• Screws for attaching the brackets to the chassis (included)

Figure 3-2 Standard Rack-Mount Brackets

Attaching the Brackets

To attach the mounting brackets to the chassis, follow this procedure:

Step 1 Set the chassis on a flat surface. (See Figure 3-3.)

Note The chassis may be installed with either the front or rear panel facing forward.

Step 2 Attach the standard 19 or 23-inch rack brackets to the sides of the chassis. Use the screws provided with

the mounting brackets. (See Figure 3-3.)

Note There are three sets of mounting holes on the sides of the chassis. Attach the brackets for front,

rear, or middle mounting.

Figure 3-3 Standard Bracket Installation—Front Panel Forward

36012

Bracket for 23-inch rackBracket for 19-inch rack

35669

Note: The second bracket attaches to the other side of the chassis.

The chassis can also be installed with the rear panel forward.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 101 102

Pas de commentaire

Cisco Systems Chassis AS5350 Manuel d'installation Page 30