Cisco Systems Chassis AS5350 Manuel d'installation télécharger pdf (Page 38)

3-12

Cisco AS5350 Universal Gateway Chassis Installation Guide

78-10754-03 0A

Chapter 3 Installing the Cisco AS5350

Connecting to the Console and Auxiliary Ports

Figure 3-13 Connecting the Console Terminal

Connecting a Modem to the Auxiliary Port

To connect a modem to the auxiliary port, follow this procedure:

Step 1 Connect a modem to the auxiliary port on the Cisco AS5350 using an RJ-45 rollover cable with an

RJ-45-to-DB-25 adapter. The adapter provided is labeled MODEM. The adapter and the rollover cable

are included in the accessory kit that comes with the universal gateway.(See Figure 3-14.)

Note Make sure that your modem and the auxiliary port on the Cisco AS5350 are configured for the

same transmission speed (38400 baud is typical) and hardware flow control with Data Carrier

Detect (DCD) and Data Terminal Ready (DTR) operations.

35676

RJ-45-to-RJ-45

rollover cable

PC (laptop)

RJ-45

Console port

(RJ-45)

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 101 102

Pas de commentaire

Cisco Systems Chassis AS5350 Manuel d'installation Page 38