Cisco Systems CSR 1000V Manuel d'utilisateur télécharger pdf (Page 148)

12-16

Cisco CSR 1000V Series Cloud Services Router Software Configuration Guide

OL-27477-07

Chapter 12 Configuring Call Home for the Cisco CSR 1000V

How to Configure Call Home

Message Severity Threshold

When you subscribe a destination profile to the Syslog alert group, you can set a threshold for the

sending of alert group messages based on the level of severity of the message. Any message with a value

lower than the destination profile specified threshold is not sent to the destination.

The severity threshold is configured using the keywords in Table 12-1 and ranges from catastrophic

(level 9, highest level of urgency) to debugging (level 0, lowest level of urgency).

Other alert groups do not allow setting a threshold for severity.

Note Call Home severity levels are not the same as system message logging severity levels.

Table 12-1 Severity and Syslog Level Mapping

Level Keyword Syslog Level Description

9 catastrophic — Network-wide catastrophic failure.

8 disaster — Significant network impact.

7 fatal Emergency (0) System is unusable.

6 critical Alert (1) Critical conditions, immediate attention needed.

5 major Critical (2) Major conditions.

4 minor Error (3) Minor conditions.

3 warning Warning (4) Warning conditions.

2 notification Notice (5) Basic notification and informational messages.

Possibly independently insignificant.

1 normal Information (6) Normal event signifying return to normal state.

1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 219 220

Pas de commentaire

Cisco Systems CSR 1000V Manuel d'utilisateur Page 148