Cisco Systems CSR 1000V Manuel d'utilisateur Page 194

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 220
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 193
14-4
Cisco CSR 1000V Series Cloud Services Router Software Configuration Guide
OL-27477-07
Chapter 14 Configuring Support for Management Using the REST API
Enabling REST API Support Using the Cisco IOS XE CLI
9. no shutdown
10. exit
11. virtual-service csr_mgmt
12. vnic gateway virtualportgroup virtual-port-group-number
13. guest ip address remote-mgmt-ipv4-addr
14. activate
15. ip route ip-address subnet-mask virtualportgroup virtual-port-group-number
DETAILED STEPS
Command or Action Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
interface mgmt-interface
Example:
Router(config)# interface gigabitethernet1
Enters interface configuration mode for the
management interface.
Step 4
ip address mgmt-ipv4-addr subnet-mask
Example:
Router(config-if)# ip address 172.25.29.235
255.255.255.128
Configures the IP address for the management
interface.
Step 5
no shutdown
Example:
Router(config-if)# no shutdown
Enables the management interface.
Step 6
exit
Example:
Router(config-if)# exit
Exits interface configuration mode.
Step 7
interface virtualportgroup virtualportgroup-number
Example:
Router(config)# interface virtualportgroup 0
Creates a virtual port group and enters virtual port
group interface configuration mode.
Vue de la page 193
1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 219 220

Commentaires sur ces manuels

Pas de commentaire