Cisco Systems ONS 15310-CL Guide de dépannage télécharger pdf (Page 188)

2-78

Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0

Chapter 2 Alarm Troubleshooting

2.7.116 INHSWPR

Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA) for ONS 15310-MA

SONET Logical Object: EQPT

The Inhibit Switch To Protect Request on Equipment condition occurs on traffic cards when the ability

to switch to protect has been disabled. If the port is part of a 1+1 protection scheme, traffic remains

locked onto the working system.

Clear the INHSWPR Condition

Step 1 If the condition is raised against a 1+1 port, complete the “Initiate a 1+1 Manual Switch Command”

procedure on page 2-148.

Step 2 If the condition does not clear, log into the Cisco Technical Support Website at

http://www.cisco.com/techsupport for more information or call Cisco TAC (1-800-553-2447).

2.7.117 INHSWWKG

Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA) for ONS 15310-MA

SONET Logical Object: EQPT

The Inhibit Switch To Working Request on Equipment condition occurs on ONS 15310-MA traffic cards

when the ability to switch to working has been disabled. If the card is part of a 1+1 protection scheme,

traffic remains locked onto the protect system.

Step 1 If the condition is raised against a 1+1 port, complete the “Initiate a 1+1 Manual Switch Command”

procedure on page 2-148.

Step 2 If the condition does not clear, log into the Cisco Technical Support Website at

http://www.cisco.com/techsupport for more information or call Cisco TAC (1-800-553-2447).

2.7.118 INTRUSION-PSWD

Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)

SONET Logical Object: NE

The Security Intrusion Incorrect Password condition occurs after a Superuser attempts a settable number

of unsuccessful logins, a login with an expired password, or an invalid password. The alarmed user is

locked out of the system, and INTRUSION-PSWD condition is raised. This condition is only shown in

Superuser login sessions, not in login sessions for lower-level users. The INTRUSION-PSWD condition

is automatically cleared when a settable lockout timeout expires, or it can be manually cleared in CTC

by the Superuser if lockout is permanent.

1 2 ... 183 184 185 186 187 188 189 190 191 192 193 ... 333 334

Pas de commentaire

Cisco Systems ONS 15310-CL Guide de dépannage Page 188