Cisco Systems OL-9977-05 Manuel d'utilisateur Page 21

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 88
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 20
CHAPTER
1-1
Cisco Aironet 1500 Series Outdoor Mesh Access Point Hardware Installation Guide
OL-9977-05
1
Overview
The Cisco Aironet 1500 Series Outdoor Mesh Access Point (hereafter called the access point) is a
wireless device designed for wireless client access, point-to-point bridging, point-to-multipoint
bridging, and point-to-multipoint mesh wireless connectivity. The access point is a standalone unit that
can be mounted on a streetlight pole or on a building wall or overhang.access point
The access point is available in two models: LAP1510 (supports 2.4-GHz and 5-GHz radios) and
LAP1505 (supports a 2.4-GHz radio).The access point provides client access and supports 6 to 54 Mbps
data rates without the need for a license. The LAP1510 model dedicates the 5-GHz radio for backhaul
operations to reach a wired network and uses the 2.4-GHz radio for wireless clients. The LAP1505 model
uses the 2.4-GHz radio for both backhaul and wireless clients.
The access point can also operate as a relay node for other access points not directly connected to a wired
network. Intelligent wireless routing is provided by the patent-pending Adaptive Wireless Path Protocol
(AWPP). This enables each access point to identify its neighbors and intelligently choose the optimal
path to the wired network by calculating the cost of each path in terms of signal strength and the number
of hops required to get to a controller.
The access point is configured, monitored, and operated through a Cisco wireless LAN controller
(hereafter called a controller) as described in the Cisco Wireless LAN Controller Configuration Guide.
The Deployment Guide: Cisco Mesh Networking Solution describes how to plan and initially configure
the Cisco Mesh network, which supports wireless point-to-point, point-to-multipoint, and mesh
deployments. The controllers use a browser-based management system, a command-line interface (CLI),
or the Cisco Wireless Control System (WCS) network management system to manage the controller and
the associated access points. The access point is compliant with Wi-Fi Protected Access (WPA2) and
employs hardware-based Advanced Encryption Standard (AES) encryption between wireless nodes to
provide end-to-end security.
This chapter provides information on the following topics:
Hardware Features, page 1-2
Network Configuration Examples, page 1-6
Vue de la page 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 87 88

Commentaires sur ces manuels

Pas de commentaire