Cisco Systems C2960XSTACK Manuel d'utilisateur télécharger pdf (Page 105)

PurposeCommand or Action

◦

(Optional) encapsulation replicate specifies that the destination

interface replicates the source interface encapsulation method. If not

selected, the default is to send packets in native form (untagged).

For local SPAN, you must use the same session number for the source

and destination interfaces.

You can use monitor session session_number destination command

multiple times to configure multiple destination ports.

Note

Specifies the SPAN session, the types of packets to filter, and the ACLs to use

in an FSPAN session.

monitor session session_number filter

{ip | ipv6 | mac} access-group

{access-list-number | name}

Step 5

• For session_number, specify the session number entered in Step 3.

Example:

Switch(config)# monitor session 2

filter ipv6 access-group 4

•

For access-list-number, specify the ACL number that you want to use to

filter traffic.

•

For name, specify the ACL name that you want to use to filter traffic.

Returns to privileged EXEC mode.end

Example:

Switch(config)# end

Step 6

Configuring an FRSPAN Session

Beginning in privileged EXEC mode, follow these steps to start an RSPAN source session, specify the

monitored source and the destination RSPAN VLAN, and configure FRSPAN for the session.

SUMMARY STEPS

configure terminal

no monitor session {session_number | all | local | remote}

monitor session session_number source {interface interface-id | vlan vlan-id} [, | -] [both | rx | tx]

monitor session session_number destination remote vlan vlan-id

vlan vlan-id

remote-span

exit

monitor session session_number filter {ip | ipv6 | mac} access-group {access-list-number | name}

end

Catalyst 2960-X Switch Network Management Configuration Guide, Cisco IOS Release 15.0(2)EX

OL-29044-01 93

Configuring SPAN and RSPAN

Configuring an FRSPAN Session

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 111 112

Commentaires sur ces manuels

Pas de commentaire

Cisco Systems C2960XSTACK Manuel d'utilisateur Page 105

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Cisco Systems C2960XSTACK