PurposeCommand or Action
Make sure that you have reestablished the connection
between the switch and the event connection by
examining the output from show cns event connections.
Step 9
Related Topics
Enabling the Cisco IOS CNS Agent, on page 22
Hostname and DeviceID, on page 17
Enabling a Partial Configuration for Cisco IOS CNS Agent
Beginning in privileged EXEC mode, follow these steps to enable the Cisco IOS CNS agent and to initiate a
partial configuration on the switch.
SUMMARY STEPS
1.
configure terminal
2.
cns config partial {ip-address | hostname} [port-number] [source ip-address]
3.
end
DETAILED STEPS
PurposeCommand or Action
Enters the global configuration mode.configure terminal
Example:
Switch# configure terminal
Step 1
Enables the configuration agent, and initiates a partial configuration.
cns config partial {ip-address | hostname}
[port-number] [source ip-address]
Step 2
•
For {ip-address | hostname}, enter the IP address or the hostname
of the configuration server.
Example:
Switch(config)# cns config partial
172.28.129.22 2013
•
(Optional) For port-number, enter the port number of the
configuration server. The default port number is 80.
•
(Optional) Enter source ip-address to use for the source IP
address.
Though visible in the command-line help string, the encrypt
keyword is not supported.
Note
Catalyst 2960-X Switch Network Management Configuration Guide, Cisco IOS Release 15.0(2)EX
30 OL-29044-01
Configuring Cisco IOS Configuration Engine
Enabling a Partial Configuration for Cisco IOS CNS Agent
Commentaires sur ces manuels