Cisco Systems C2960XSTACK Manuel d'utilisateur Page 37
- Page / 112
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
PurposeCommand or Action
Returns to global configuration mode.exit
Example:
Switch(config)# exit
Step 5
Enters CNS connect configuration mode, specifies the name of the CNS
connect profile, and defines the profile parameters. The switch uses the CNS
connect profile to connect to the Configuration Engine.
cns connect name [retries number]
[retry-interval seconds] [sleep seconds]
[timeout seconds]
Step 6
Example:
Switch(config)# cns connect dhcp
•
Enter the name of the CNS connect profile.
•
(Optional) For retries number, enter the number of connection retries.
The range is 1 to 30. The default is 3.
•
(Optional) For retry-interval seconds, enter the interval between
successive connection attempts to the Configuration Engine. The range
is 1 to 40 seconds. The default is 10 seconds.
•
(Optional) For sleep seconds, enter the amount of time before which
the first connection attempt occurs. The range is 0 to 250 seconds. The
default is 0.
•
(Optional) For timeout seconds, enter the amount of time after which
the connection attempts end. The range is 10 to 2000 seconds. The
default is 120.
Specifies the interface parameters in the CNS connect profile.
discover {controller controller-type | dlci
[subinterface subinterface-number] |
interface [interface-type] | line line-type}
Step 7
•
For controller controller-type, enter the controller type.
Example:
Switch(config-cns-conn)# discover
interface gigabitethernet
•
For dlci, enter the active data-link connection identifiers (DLCIs).
(Optional) For subinterface subinterface-number, specify the
point-to-point subinterface number that is used to search for active
DLCIs.
•
For interface [interface-type], enter the type of interface.
•
For line line-type, enter the line type.
Specifies the list of CNS connect templates in the CNS connect profile to be
applied to the switch configuration. You can specify more than one template.
template name [... name]
Example:
Switch(config-cns-conn)# template
template-dhcp
Step 8
Repeat Steps 7 to 8 to specify more
interface parameters and CNS connect
templates in the CNS connect profile.
Step 9
Catalyst 2960-X Switch Network Management Configuration Guide, Cisco IOS Release 15.0(2)EX
OL-29044-01 25
Configuring Cisco IOS Configuration Engine
Enabling an Initial Configuration for Cisco IOS CNS Agent
- Cisco IOS Release 15.0(2)EX 1
- CONTENTS 3
- Contents 4
- OL-29044-01 v 5
- OL-29044-01 vii 7
- Document Conventions 9
- Timesaver 10
- Related Documentation 11
- Command Modes 13
- Table 1: Command Mode Summary 14
- Using the Help System 15
- CLI Error Messages 16
- Configuration Logging 17
- Recalling Commands 18
- 12 OL-29044-01 24
- Finding Feature Information 25
- 14 OL-29044-01 26
- Configuration Service 27
- Event Service 28
- NameSpace Mapper 28
- DeviceID 29
- Hostname and DeviceID 29
- Cisco IOS CNS Agents 30
- Automated CNS Configuration 31
- Enabling the CNS Event Agent 32
- What to Do Next 33
- Before You Begin 34
- Refreshing DeviceIDs 40
- Monitoring CNS Configurations 43
- Additional References 44
- Information About CDP 45
- How to Configure CDP 46
- Disabling CDP 48
- Enabling CDP 49
- Disabling CDP on an Interface 50
- Enabling CDP on an Interface 51
- 42 OL-29044-01 54
- Protocol 55
- 44 OL-29044-01 56
- Prerequisites for SNMP 56
- OL-29044-01 45 57
- Restrictions for SNMP 58
- Information About SNMP 58
- SNMP Agent Functions 59
- SNMP Community Strings 59
- SNMP MIB Variables Access 59
- SNMP Notifications 60
- Default SNMP Configuration 61
- SNMP Configuration Guidelines 61
- How to Configure SNMP 62
- Configuring Community Strings 63
- 56 OL-29044-01 68
- OL-29044-01 57 69
- Monitoring SNMP Status 74
- SNMP Examples 75
- Management Protocol 76
- 66 OL-29044-01 78
- SPAN and RSPAN 80
- Remote SPAN 81
- 70 OL-29044-01 82
- SPAN Sessions 83
- Monitored Traffic 83
- Source Ports 84
- Source VLANs 85
- VLAN Filtering 85
- Destination Port 85
- RSPAN VLAN 86
- OL-29044-01 75 87
- Flow-Based SPAN 88
- Configuration Guidelines 89
- Creating a Local SPAN Session 90
- Specifying VLANs to Filter 94
- SUMMARY STEPS 100
- DETAILED STEPS 100
- Example: 101
- Configuring an FSPAN Session 103
- Configuring an FRSPAN Session 105
- Configuring SPAN and RSPAN 110
- 98 OL-29044-01 110
- OL-29044-01 IN-1 111
- IN-2 OL-29044-01 112
Produits connexes et manuels pour Mise en réseau Cisco Systems C2960XSTACK
(32 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.247 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels