Cisco Systems SPA2102 Guide de l'utilisateur télécharger pdf (Page 36)

Phone Adapter with Router

Chapter 6: Using the Web-based Utility

The Router Tab

PPPoE Service Name (optional). Enter the service name provided by your ISP.

Optional Settings

HostName. Enter the host name, if provided by your ISP.

Domain. Enter the domain name, if provided by your ISP.

Primary DNS. Enter the IP address of the primary DNS server.

Secondary DNS (optional). Enter the IP address of the secondary DNS server.

MAC Clone Settings

Enable MAC Clone Service. Select whether you want to clone a MAC address onto the Phone Adapter, yes or

no. The default is no.

Cloned MAC Address. Enter the MAC address you want to clone.

Remote Management

Enable WAN Web Server. This feature lets you enable or disable access to the Web-based Utility from the WAN

side. Select yes or no from the drop-down menu. The default is no.

WAN Web Server Port. Enter the port number used to access the Utility from the WAN side. The default is 80.

QOS Settings

QOS QDisc. QoS prioritizes voice communications when different types of traffic are competing for bandwidth.

Select the method you want to use: NONE, CBQ, or TBF. The default is NONE.

mac address: the unique address that a

manufacturer assigns to each networking

device.

VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 95 96

Pas de commentaire

Cisco Systems SPA2102 Guide de l'utilisateur Page 36