Cisco Systems SPA2102 Guide de l'utilisateur télécharger pdf (Page 69)

Phone Adapter with Router

Appendix B: Finding the MAC Address and IP Address for Your Ethernet Adapter

Windows 98 or Me Instructions

Appendix B: Finding the MAC Address and IP Address for Your

Ethernet Adapter

This section describes how to find the MAC address for your computer’s Ethernet adapter so you can use the

MAC address cloning feature of the Phone Adapter. You can also find the IP address of your computer’s Ethernet

adapter. This IP address is used for the Phone Adapter’s forwarding and/or DMZ features. Follow the steps in this

appendix to find the adapter’s MAC or IP address in Windows 98, Me, 2000, or XP.

Windows 98 or Me Instructions

1. Click Start and Run. In the Open field, enter winipcfg. Then press the Enter key or the OK button.

2. When the IP Configuration screen appears, select the Ethernet adapter you have connected to the Phone

Adapter via a CAT 5 Ethernet network cable.

3. Write down the Adapter Address as shown on your computer screen. This is the MAC address for your

Ethernet adapter and is shown as a series of numbers and letters.

The MAC address/Adapter Address is what you will use for MAC address cloning.

The example shows the Ethernet adapter’s IP address as 192.168.1.100. Your computer may show

something different.

Figure B-2: MAC/Adapter Address

Figure B-1: IP Configuration Screen

VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 95 96

Pas de commentaire

Cisco Systems SPA2102 Guide de l'utilisateur Page 69