Required ConfigurationDevice
•
A bootstrap configuration file that includes the
CNS configuration commands that enable the
switch to communicate with the Configuration
Engine
•
The switch configured to use either the switch
MAC address or the serial number (instead of
the default hostname) to generate the ConfigID
and EventID
•
The CNS event agent configured to push the
configuration file to the switch
TFTP server
One or more templates for each type of device, with
the ConfigID of the device mapped to the template.
CNS Configuration Engine
1
A DHCP Relay is needed only when the DHCP Server is on a different subnet from the client.
Related Topics
Initial Configuration, on page 18
How to Configure the Configuration Engine
Enabling the CNS Event Agent
You must enable the CNS event agent on the switch before you enable the CNS configuration agent.Note
Beginning in privileged EXEC mode, follow these steps to enable the CNS event agent on the switch.
SUMMARY STEPS
1.
configure terminal
2.
cns event {hostname | ip-address} [port-number] [ [keepalive seconds retry-count] [failover-time seconds
] [reconnect-time time] | backup]
3.
end
Catalyst 2960-X Switch Network Management Configuration Guide, Cisco IOS Release 15.0(2)EX
20 OL-29044-01
Configuring Cisco IOS Configuration Engine
How to Configure the Configuration Engine
Commentaires sur ces manuels