Cisco Systems WSC2960X48TDL Manuel d'utilisateur télécharger pdf (Page 103)

PurposeCommand or Action

Specifies the interface to be configured, and enter

interface configuration mode.

interface interface-id

Example:

Switch(config)# interface gigabitethernet1/0/1

Step 2

Enables EEE on the specified interface. When EEE is

enabled, the device advertises and autonegotiates EEE

to its link partner.

power efficient-ethernet auto

Example:

Switch(config-if)# power efficient-ethernet auto

Step 3

Disables EEE on the specified interface.no power efficient-ethernet auto

Example:

Switch(config-if)# no power efficient-ethernet

Step 4

auto

Returns to privileged EXEC mode.end

Example:

Switch(config-if)# end

Step 5

(Optional) Saves your entries in the configuration file.copy running-config startup-config

Example:

Switch# copy running-config startup-config

Step 6

Monitoring EEE

Table 12: Commands for Displaying EEE Settings

PurposeCommand

Displays EEE capabilities for the specified interface.

show eee capabilities interface interface-id

Displays EEE status information for the specified interface.

show eee status interface interface-id

Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX

OL-29034-01 91

Configuring EEE

Monitoring EEE

1 2 ... 98 99 100 101 102 103 104 105 106 107 108

Pas de commentaire

Cisco Systems WSC2960X48TDL Manuel d'utilisateur Page 103