Cisco Systems WSC2960X48TDL Manuel d'utilisateur télécharger pdf (Page 98)

SUMMARY STEPS

configure terminal

interface interface-id

power inline police [action{log | errdisable}]

exit

Use one of the following:

•

errdisable detect cause inline-power

•

errdisable recovery cause inline-power

•

errdisable recovery interval interval

exit

Use one of the following:

•

show power inline police

•

show errdisable recovery

DETAILED STEPS

PurposeCommand or Action

Enters global configuration mode.configure terminal

Example:

Switch# configure terminal

Step 1

Specifies the physical port to be configured, and enter interface

configuration mode.

interface interface-id

Example:

Switch(config)# interface

gigabitethernet2/0/1

Step 2

If the real-time power consumption exceeds the maximum power

allocation on the port, configures the switch to take one of these actions:

power inline police [action{log | errdisable}]

Example:

Switch(config-if)# power inline police

Step 3

• power inline police—Shuts down the PoE port, turns off power

to it, and puts it in the error-disabled state.

You can enable error detection for the PoE error-disabled cause

by using the errdisable detect cause inline-power global

configuration command. You can also enable the timer to

recover from the PoE error-disabled state by using the

errdisable recovery cause inline-power interval interval

global configuration command.

Note

• power inline police action errdisable—Turns off power to the

port if the real-time power consumption exceeds the maximum

power allocation on the port.

Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX

86 OL-29034-01

Configuring PoE

Configuring Power Policing

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 107 108

Commentaires sur ces manuels

Pas de commentaire

Cisco Systems WSC2960X48TDL Manuel d'utilisateur Page 98

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel Cisco Systems WSC2960X48TDL