Cisco Systems WSC2960X48TDL Manuel d'utilisateur télécharger pdf (Page 97)

PurposeCommand or Action

(Optional) Disables CDP.no cdp run

Example:

Switch(config)# no cdp run

Step 2

Specifies the physical port to be configured, and enter

interface configuration mode.

interface interface-id

Example:

Switch(config)# interface gigabitethernet2/0/1

Step 3

Configures the power consumption of a powered device

connected to a PoE port on the switch.

power inline consumption wattage

Example:

Switch(config-if)# power inline consumption

5000

Step 4

The range for each device is 4000 to 30000 mW (PoE+).

The default is 30000 mW.

Returns to privileged EXEC mode.end

Example:

Switch(config-if)# end

Step 5

Displays the power consumption data.show power inline consumption

Example:

Switch# show power inline consumption

Step 6

Configuring Power Policing

By default, the switch monitors the real-time power consumption of connected powered devices. You can

configure the switch to police the power usage. By default, policing is disabled.

Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX

OL-29034-01 85

Configuring PoE

Configuring Power Policing

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 107 108

Pas de commentaire

Cisco Systems WSC2960X48TDL Manuel d'utilisateur Page 97