Cisco Systems WSC2960X48TDL Manuel d'utilisateur télécharger pdf (Page 36)

Adding a Description for an Interface

SUMMARY STEPS

configure terminal

interface interface-id

description string

end

show interfaces interface-id description

DETAILED STEPS

PurposeCommand or Action

Enters global configuration mode.configure terminal

Example:

Switch# configure terminal

Step 1

Specifies the interface for which you are adding a

description, and enter interface configuration mode.

interface interface-id

Example:

Switch(config)# interface gigabitethernet1/0/2

Step 2

Adds a description (up to 240 characters) for an

interface.

description string

Example:

Switch(config-if)# description Connects to

Step 3

Marketing

Returns to privileged EXEC mode.end

Example:

Switch(config-if)# end

Step 4

Verifies your entry.

show interfaces interface-id description

Step 5

Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX

24 OL-29034-01

Configuring Interface Characteristics

Adding a Description for an Interface

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 107 108

Pas de commentaire

Cisco Systems WSC2960X48TDL Manuel d'utilisateur Page 36