Cisco Systems WSC2960X48TDL Manuel d'utilisateur télécharger pdf (Page 79)

PurposeCommand or Action

Enables the NMSP features on the switch.nmsp enable

Example:

Switch(config)# nmsp enable

Step 2

Specifies the NMSP notification interval.nmsp notification interval {attachment | location}

interval-seconds

Step 3

attachment—Specifies the attachment notification interval.

Example:

Switch(config)# nmsp notification interval

location—Specifies the location notification interval.

interval-seconds—Duration in seconds before the switch

sends the MSE the location or attachment updates. The range

is 1 to 30; the default is 30.

location 10

Returns to privileged EXEC mode.end

Example:

Switch(config)# end

Step 4

Verifies the configuration.show network-policy profile

Example:

Switch# show network-policy profile

Step 5

(Optional) Saves your entries in the configuration file.copy running-config startup-config

Example:

Switch# copy running-config startup-config

Step 6

Configuration Examples for LLDP, LLDP-MED, and Wired

Location Service

Configuring Network-Policy TLV: Examples

This example shows how to configure VLAN 100 for voice application with CoS and to enable the

network-policy profile and network-policy TLV on an interface:

Switch# configure terminal

Switch(config)# network-policy 1

Switch(config-network-policy)# voice vlan 100 cos 4

Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX

OL-29034-01 67

Configuring LLDP, LLDP-MED, and Wired Location Service

Configuration Examples for LLDP, LLDP-MED, and Wired Location Service

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 107 108

Pas de commentaire

Cisco Systems WSC2960X48TDL Manuel d'utilisateur Page 79